Dell XPS 13 7390 2-in-1 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Dell XPS 13 7390 2-in-1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 13 7390 2-in-1 49 페이지.
Dell XPS 13 7390 2-in-1에 대해서도 마찬가지입니다: 설정 및 사양 (22 페이지), 빠른 시작 매뉴얼 (18 페이지)

페이지 인쇄

Steps

1. Remove the eight Torx screws (M2x4.5) that secure the base cover to the palm-rest assembly.

2. Starting from the bottom-left corner, pry the base cover in the direction of the arrows to release it from the palm-rest assembly.

CAUTION:

Do not pull on or pry the base cover from the top as it may damage the base cover.

3. Hold both sides of the base cover and rotate from front to back to remove from palm rest assembly.

NOTE:

The pins at the bottom of the base cover for grounding the antennas and the audio board are fragile. Place

the base cover on a clean surface to avoid damage to the pins.

Installing the base cover

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the base cover and provide a visual representation of the installation procedure.

Removing and installing components