Dell XPS 13 7390 2-in-1 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Dell XPS 13 7390 2-in-1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 13 7390 2-in-1 49 페이지.
Dell XPS 13 7390 2-in-1에 대해서도 마찬가지입니다: 설정 및 사양 (22 페이지), 빠른 시작 매뉴얼 (18 페이지)

페이지 인쇄

Steps

1. Adhere the magnet and the metal bar to the battery.

NOTE:

Install the magnet and the metal bar from the faulty battery.

2. Align the screw holes on the battery with the screw holes on the system board and palm-rest assembly.

3. Replace the two screws (M1.2x4) that secure the battery to the system board.

4. Replace the seven screws (M1.6x3) that secure the battery to the palm-rest assembly.

5. Place the interposer board to the connector on the system board.

NOTE:

The interposer board is not polarity sensitive and both sides are compatible.

6. Connect the battery cable to the interposer board.

7. Replace the Torx 5 screw (M1.6x3.4) that secures the battery cable to the system board.

Next steps

1. Install the

base

cover.

2. Follow the procedure in

Display assembly

Removing the display assembly

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

3. Remove the battery.

About this task

The following images indicate the location of display assembly and provide a visual representation of the removal procedure.

Removing and installing components

After working inside your

computer.

Before working inside your

computer.