Dell XPS 13 7390 2-in-1 서비스 매뉴얼 - 페이지 26

{카테고리_이름} Dell XPS 13 7390 2-in-1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 13 7390 2-in-1 49 페이지.
Dell XPS 13 7390 2-in-1에 대해서도 마찬가지입니다: 설정 및 사양 (22 페이지), 빠른 시작 매뉴얼 (18 페이지)

페이지 인쇄

Steps

1. Align the screw holes on the system board with the screw holes on the palm-rest assembly.

2. Replace the fours screws (M2x4), three screws (M1.2x3), and one screw (M1.2x4) that secure the system board to the palm-rest

assembly.

3. Connect the keyboard-controller board cable to the system board and close the latch to secure the cable.

4. Connect the speaker cable to the system board.

5. Adhere the fingerprint-reader board to the slot on the system board.

6. Connect the fingerprint-reader cable to the system board and close the latch to secure the cable.

7. Align the screw holes on the USB Type-C bracket to the screw holes on the system board.

8. Replace the screw (M1.6x3) and the screw (M1.6x2) that secures the USB Type-C port bracket to the system board.

NOTE:

The M1.6x2 screw has a bigger head than the M1.6x3 screw.

9. Route the display cable and camera cable through the routing guides on the system board.

10. Connect the display cable and camera cable to the system board.

11. Adhere the tapes that secure the display cable and camera cable to the system board.

12. Align and place the display-cable bracket on the system board.

13. Tighten the captive screw (M1.6x3) that secures the display-cable bracket to the system board.

Next steps

1. Install the battery.

2. Install the

base

cover.

3. Follow the procedure in

After working inside your

computer.

Removing and installing components