Dell XPS 13 9315 2-in-1 서비스 매뉴얼 - 페이지 21

{카테고리_이름} Dell XPS 13 9315 2-in-1에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 13 9315 2-in-1 37 페이지.
Dell XPS 13 9315 2-in-1에 대해서도 마찬가지입니다: 설정 및 사양 (27 페이지), 외부 디스플레이 연결 매뉴얼 (11 페이지)

페이지 인쇄

Table 8. System setup options—Power menu (continued)

Power

Lid Switch

Enable Lid Switch

Power On Lid Open

Intel® Speed Shift Technology

Table 9. System setup options—Security menu

Security

TPM 2.0 Security On

PPI Bypass for Enable Commands

PPI Bypass for Disable Commands

Attestation Enable

Key Storage Enable

SHA-256

Clear

PPI Bypass for Clear Commands

Chassis intrusion

NOTE:

If enabled, the computer will not go to sleep, Intel® Rapid Start will be

disabled automatically, and the operating system power option will be blank if

it was set to Sleep.

Enables or disables the lid switch.

Enables the computer to power up from the off state whenever the lid is opened.

Default: ON

Enables or disables the Intel® Speed Shift Technology support. Setting this

option to enable allows the operating system to select the appropriate processor

performance automatically.

Default: ON

Select whether or not the Trusted Platform Model (TPM) is visible to the OS.

Default: ON

Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user

prompts when issuing TPM PPI enabled and activate commands.

Default: OFF

Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI

Disable and Deactivate commands.

Default: OFF

Enables to control whether the TPM Endorsement Hierarchy is available to the

OS. Disabling this setting restricts the ability to use the TPM for signature

operations.

Default: ON

Enables to control whether the TPM Endorsement Hierarchy is available to the

OS. Disabling this setting restricts the ability to use the TPM for storing owner

data.

Default: ON

Enables or disables the BIOS and the TPM to use the SHA-256 hash algorithm to

extend measurements into the TPM PCRs during BIOS boot.

Default: ON

Enables or disables the computer to clear the PTT owner information, and

returns the PTT to the default state.

Default: OFF

Enables or disables the operating system to skip BIOS Physical Presence

Interface (PPI) user prompts when issuing the Clear command.

Default: OFF

Controls the chassis intrusion feature.

System setup