Dell XPS 15-7590 재이미징 매뉴얼 - 페이지 5
{카테고리_이름} Dell XPS 15-7590에 대한 재이미징 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XPS 15-7590 16 페이지. Microsoft windows
Dell XPS 15-7590에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (18 페이지)
페이지 인쇄
Re-imaging is the process of removing all software on the computer and reinstalling the removed software. Re-imaging is required when
software in the computer is corrupted or damaged and can also be used as a means of removing harmful and malicious software in your
computer. This re-imaging guide provides the steps required for re-imaging your computer.
CAUTION:
This re-imaging guide is designed for system administrators. Do not attempt to re-image the system if you are not an
administrator or are unsure of the procedures. Failure to follow instructions may result in permanent data loss.
NOTE:
Information provided in this guide is applicable to computers with Microsoft Windows only.
This guide assists you in installing Dell-recommended software stack and settings, drivers, and applications, which are tested and validated
on the XPS 15-7590. The installation of the listed drivers and applications as described in the guide enhances the optimal performance of
your computer.
Dell also provides drivers and applications that are not included with the Windows operating system. These drivers are required to enable
the following Solid State Drives (SSD):
•
128 GB SSD
•
256 GB PCIe SSD
•
512 GB PCIe SSD
•
1024 GB PCIe SSD
•
2048 GB PCIe SSD
It is always recommended to re-image on a newly-installed operating system and not from any previous image-build. Ensure BIOS settings,
including SATA configurations and modes, are appropriately set and the latest drivers and applications are used when re-imaging the
computer.
2
Introduction
Introduction
5