Dell 3250 제품 설명서 - 페이지 31
{카테고리_이름} Dell 3250에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 3250 37 페이지. Product guide (.pdf)
Dell 3250에 대해서도 마찬가지입니다: 정보 업데이트 (32 페이지), 소유자 매뉴얼 (39 페이지), 소유자 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지)
Intel® Server Platform SR870BH2
10. Beep Codes
During the course of executing POST, there are occasions where fatal problems may occur
before video is enabled. These fatal errors are conveyed with the use of the speaker via
Encoded beeps, coupled with post debug codes.
Since the duration of the display-less POST execution is relatively short, there are fewer beep
codes than displayed error codes.
In order to extend the useful range of the beep codes, without the need to have dozens of
codes, the beeps are classified and the distinction within class is made via the post debug card.
Bolded and italicized items are not used on SR870BH2 BIOS.
Beep
Error message
count
3
Memory failure -
Memory test failure.
4
System timer
5
Processor failure
7
Processor exception
interrupt error
8
Display memory
read/write error
9
ROM checksum error
11
Invalid BIOS
Revision 1.1
Table 7. Error Beep Codes
Description
1) No valid memory was found in the
system.
2) Mismatched DIMMs in a row, Row
disabled and no valid memory to boot.
System timer is not operational
Processor failure detected
The CPU generated an exception
interrupt.
The system video adapter is either
missing or its memory is faulty.
System BIOS ROM checksum error
General BIOS ROM error
Beep Codes
Course of action / Possible Failure
See "Memory" in Debug Methodology
and failure Isolation section.
See "Processor" in Debug
Methodology and failure Isolation
section. If symptom persists replace
main board.
See "Processor" in Debug
Methodology and failure Isolation
section.
See "Processor" in Debug
Methodology and failure Isolation
section.
Check Add-in video adapter if used, if
onboard is used Video DRAM may be
failing, replace main board.
Corrupted BIOS, Clear CMOS or
perform BIOS recovery –refer to
"Clearing CMOS and BIOS Recovery"
section
Corrupted BIOS, Clear CMOS or
perform BIOS recovery –refer to
"Clearing CMOS and BIOS Recovery"
section
25