Dell Alienware X51 소유자 매뉴얼 - 페이지 17

{카테고리_이름} Dell Alienware X51에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Alienware X51 21 페이지. Quick start guide
Dell Alienware X51에 대해서도 마찬가지입니다: 사양 (5 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example,

to boot from the optical drive to run Dell Diagnostics from the Drivers and

Utilities disc. The previous boot sequence is restored at the next boot.

1 If you are booting from a USB device, connect the USB device to a

USB connector.

2 Turn on (or restart) your computer.

3 When F2 Setup, F12 Boot Options appears in the lower-right

corner of the screen, press <F12>.

NOTE:

If you wait too long and the operating system logo appears, continue to wait

until you see the Microsoft Windows desktop. Then shut down your computer and

try again.

The Boot Device Menu appears, listing all available boot devices.

4 On the Boot Device Menu choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight USB

Storage Device and press <Enter>.

Changing Boot Sequence for Future Boots

1 Enter system setup. See "Entering System Setup" on page 11.

2 Use the arrow keys to highlight the Boot menu option and press <Enter>

to access the menu.

NOTE:

3 Press the up- and down-arrow keys to move through the list of devices.

4 Press plus (+) or minus (–) to change the boot priority of the device.

Write down your current boot sequence in case you want to restore it.

System Setup