Dell D11S 설정 및 사양 매뉴얼 - 페이지 18

{카테고리_이름} Dell D11S에 대한 설정 및 사양 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell D11S 31 페이지. Small form factor
Dell D11S에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 설정 및 사양 (35 페이지), 소유자 매뉴얼 (45 페이지), 설정 및 사양 매뉴얼 (35 페이지), 설치 매뉴얼 (22 페이지), 설정 및 사양 (37 페이지)

Dell D11S 설정 및 사양 매뉴얼

General options

Table 18. General
Option

System Information

Battery Information
Boot Sequence
Advanced Boot Options
UEFI Boot Path Security
Date/Time
.
System information
Table 19. System Configuration
Option
Integrated NIC
18
System setup
Description
Displays the following information:
System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Ownership Date, Manufacture Date, and the Express Service Code.
Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory
Channel Mode, Memory Technology, DIMM 1 Size,, and DIMM 2 Size.
PCI Information: Displays SLOT1, SLOT2, SLOT3_M.2, SLOT4_M.2
Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
Device Information: Displays SATA-0, SATA 4, M.2 PCIe SSD-0, LOM MAC Address, Video
Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Provides detailed information about Dell batteries.
Allows you to specify the order in which the computer attempts to find an operating system from the
devices specified in this list.
Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is selected.
Enable Legacy Option ROMs—Default
Enable Attempt Legacy Boot
This option controls whether or not the system will prompt the user to enter the Admin password
when booting a UEFI boot path from the F12 Boot Menu.
Always, Except Internal HDD
Always
Never
Allows you to set the date and time settings. Changes to the system date and time take effect
immediately.
Description
Allows you to control the on-board LAN controller. The option 'Enable UEFI Network Stack' is not
selected by default. The options are:
Disabled
Enabled
Enabled w/PXE (default)