Dell D14U 설정 및 사양 - 페이지 25

{카테고리_이름} Dell D14U에 대한 설정 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell D14U 37 페이지.
Dell D14U에 대해서도 마찬가지입니다: 설정 및 사양 매뉴얼 (36 페이지), 설정 및 사양 매뉴얼 (39 페이지), 설정 및 사양 매뉴얼 (36 페이지)

페이지 인쇄
Dell D14U 설정 및 사양

One time boot menu

To enter one time boot menu, turn on your computer, and then press F12 immediately.
NOTE:
It is recommended to shutdown the computer if it is on.
The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options
are:
● Removable Drive (if available)
● STXXXX Drive (if available)
NOTE:
XXX denotes the SATA drive number.
● Optical Drive (if available)
● SATA Hard Drive (if available)
● Diagnostics
The boot sequence screen also displays the option to access the System Setup screen.

System setup options

NOTE:
Depending on the computer and its installed devices, the items listed in this section may or may not appear.

General options

Table 19. General
Option

System Information

Boot Sequence
UEFI Boot Path Security
Date/Time
.
System information
Table 20. System Configuration
Option
Integrated NIC
Description
Displays the following information:
● System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag,
Manufacture Date, Ownership Date, and the Express Service Code.
● Memory Information: Displays Memory Installed, Memory Available, Memory Speed,
Memory Channel Mode, Memory Technology, DIMM 1 Size, and DIMM 2 Size.
● PCI Information: Displays Slot1_M.2, Slot2_M.2
● Processor Information: Displays Processor Type, Core Count, Processor ID, Current
Clock Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache,
Processor L3 Cache, HT Capable, and 64-Bit Technology.
● Device Information: Displays SATA-0, M.2 PCIe SSD-2, LOM MAC Address, Video
Controller, Audio Controller, Wi-Fi Device, and Bluetooth Device.
Allows you to specify the order in which the computer attempts to find an operating system
from the devices specified in this list.
This option controls whether or not the system prompts the user to enter the Admin
password when booting a UEFI boot path from the F12 Boot Menu.
Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.
Description
Allows you to control the onboard LAN controller. The option 'Enable UEFI Network Stack' is
not selected by default. The options are:
BIOS setup
25