Dell D15S002 설정 및 사양 - 페이지 34

{카테고리_이름} Dell D15S002에 대한 설정 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell D15S002 39 페이지.

Maintenance

Table 37. Maintenance

Option

Service Tag

Asset Tag

SERR Messages

BIOS Downgrade

Data Wipe

BIOS Recovery

First Power On Date

Table 38. System Logs

Option

BIOS events

Table 39. Advanced configuration

Option

ASPM

System setup

Description

Displays the service tag of your computer.

Allows you to create a system asset tag if an asset tag is not already set.

This option is not set by default.

Controls the SERR message mechanism. This option is set by default. Some graphics cards

require that the SERR message mechanism be disabled.

Allows you to flash previous revisions of the system firmware.

● Allow BIOS Downgrade

This option is set by default.

Allows you to securely erase data from all internal storage devices.

● Wipe on Next Boot

This option is not set by default.

BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the

corrupted BIOS from a recovery file on the HDD or an external USB key.

NOTE:

BIOS Recovery from Hard Drive field must be enabled.

Always Perform Integrity Check—Performs integrity check on every boot.

Allows you the set Ownership date. The option Set Ownership Date is not set by default.

Description

Allows you to view and clear the System Setup (BIOS) POST events.

Description

Allows you to set the ASPM level.

● Auto (default) - There is handshaking between the device and PCI Express hub to

determine the best ASPM mode supported by the device

● Disabled - ASPM power management is turned off at all time

● L1 Only - ASPM power management is set to use L1