Dell Dimension 5100C 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Dell Dimension 5100C에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 5100C 47 페이지. Dell desktop computer quick reference guide
Dell Dimension 5100C에 대해서도 마찬가지입니다: 설정 (2 페이지)

페이지 인쇄
Dell Dimension 5100C 서비스 매뉴얼
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
 
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE:
To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently
cushion it.
NOTICE:
If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.
Check the documentation for the drive to verify that it is configured for your computer.
 

Removing a Hard Drive

 
1. Follow the procedures in
"Before You
 
2. Remove the
computer
cover.
 
3. Press the blue tabs on either side of the guide bracket toward each other and slide the drive up and out of the computer.
 
4. Disconnect the power cable and the serial ATA data cable from the drive.
 

Installing a Hard Drive

 
1. Remove the old
hard
drive.
 
2. Unpack the replacement hard drive, and prepare it for installation.
 
3. Check the documentation for the drive to verify that it is configured for your computer.
NOTE:
If your replacement hard drive does not have the plastic guide bracket attached, remove the bracket from the old drive by unsnapping it from the
drive. Snap the bracket onto the new drive.
Begin."