Dell GX280 - OptiPlex - SD 사용자 설명서 - 페이지 7
{카테고리_이름} Dell GX280 - OptiPlex - SD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell GX280 - OptiPlex - SD 8 페이지. Small mini-tower computer
페이지 인쇄
Documentation
1 pivot-bar slots (2)
2 pivot bar
3 hinge arms (2) in horizontal position
4 view slots (2)
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal
surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal
surface to dissipate any static electricity that could harm internal components.
7. Pull the arms toward you until they snap into position.
If the hinge arms do not snap back into position on the first attempt, slightly reposition the arms and try again.
8. After the hinge arms snap into position, lower and raise the arms two or three times to properly seat them.
9. Reattach the front-panel insert.
10. Reconnect the computer power cable to the electrical outlet.
11.
Reattach the front
door.
Reattaching the Front Door
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
1. Follow the procedures in
2. Disconnect the computer power cable from the electrical outlet.
3. Lower the hinge arms to the vertical position.
4. Align the two clips on the inside of the front door with the two hinge arms.
5. Press inward on the front door until it clips to both hinge arms.
1 hinge arms (2) in vertical position
2 front-panel door
3 front-door clips (2)
http://support.dell.com/support/edocs/systems/opgx280/en/ug/smtabout.htm#1054449
"Before You
Begin."
7/8/09 11:40 AM
Page 7 of 8