Dell GX280DT - GX280 Desktop Computer 설정 매뉴얼 - 페이지 5

{카테고리_이름} Dell GX280DT - GX280 Desktop Computer에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell GX280DT - GX280 Desktop Computer 15 페이지. Pci express dvi (digital) adapter card

페이지 인쇄

1 card cage

2 slots

3 riser boards (2)

4 system board connectors (2)

8. Reconnect any cables that you removed in

9. Connect any cables that should be attached to the card.

NOTICE:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or

cause damage to the equipment.

10. Replace the computer cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

11. Connect the monitor cable to the card's video connector.

12. Connect your computer and devices to electrical outlets, and turn them on.

Without a Card Cage

CAUTION:

Before you begin any of the procedures in this section, follow the steps in

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE:

To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack.

1. Open the computer cover.

2. Press the release tab with your thumb to release the filler bracket.

3. Remove the filler bracket by raising the hinged lever and sliding the bracket up.

4. Press the lever with your thumb until you release the securing tab.

5. While pressing the lever, insert the card firmly into the card connector:

a. Release the card-clip lever, ensuring that the tab on the card-clip lever fits into the notch on the front end of the card.

b. Secure the card by lowering the hinged lever on the back panel.

Inserting the Card

step

"Safety

Instructions."