ABB 9408 Series 사용 설명서 - 페이지 14
{카테고리_이름} ABB 9408 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB 9408 Series 20 페이지. Dissolved oxygen systems
ABB 9408 Series에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
...5 MAINTENANCE
5.2.3 Submersible Systems
Submersibles are sealed systems and apart from sensor
capsule replacement, no other maintenance is possible.
5.3 Changing the Temperature Compensator
5.3.1 Floating Ball and Dip Systems
This item is an integral part of the sensor body and is,
therefore, not maintainable. Change the complete sensor
body as described in Section 5.2.
5.3.2 Submersible System
The submersible system includes a sealed unit housing the
combined temperature compensator/oxygen sensor body and
is not accessible for maintenance purposes except for the
replacement of the sensor capsule – see Section 5.1.3 Dip
Systems.
12
6 SPECIFICATION
Sensor Type: ................................ 8012-170 sensor capsule.
Response:
Typically 20 seconds for 90% of a step change of oxygen
concentration at 20°C.
Temperature Compensation:
Automatic correction by means of integral Pt 100
resistance thermometer.
Accuracy:
-1
±0.2 mg l
or ±2% saturation within ±10°C of the calibration
temperature in the range 0 to 35°C.
Operating Temperature Range:
Operating Pressure: .................... Atmospheric
Dimensions:
Floating Ball
Ball diameter: ........................... 203 mm
Boom, outside diameter: .......... Metric - 50 mm
Boom length
Assembled ............................... 3 metres
Kit ............................................. 3 metres, user supplied
Dip
Dip Tubes:
Assembled (metric) .................. 1,2 or 3 metre options
Kit (Imperial) ............................. user supplied
Submersible
Diameter ........................................ 40 mm
Length
Cable length ................................... 10 m
Materials of Construction:
Boom: ............................................. ABS
Sensor body: .................................. ABS
Flotation ball: ................................. Polypropylene
Tube on dip system ....................... Polypropylene
Body of submersible system ......... Polypropylene
Bracket metalwork ......................... Stainless steel
Extra Connection Cable:
Part No.: ......................................... 0233-828
Maximum distance: ........................ 100 metres (328 feet)
0 to 40°C
Imperial - 1
7
/
in (48 mm
8
approximately)
40 mm outside diameter
1.9 in outside diameter
Approximately 265 mm
(335 mm with water wash)