Dell OptiPlex 3020 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Dell OptiPlex 3020에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell OptiPlex 3020 50 페이지. Small form factor
Dell OptiPlex 3020에 대해서도 마찬가지입니다: 사양 (3 페이지), 기술 매뉴얼북 (49 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Installing the Drive Cage

1. Place the drive cage on the edge of the computer to allow access to the cable connectors on the hard drive.

2. Connect the data and power cables to the back of the hard drive.

3. Flip over the drive cage and insert it into the chassis. The drive cage tabs are secured by the slots in the chassis.

4. Slide the drive-cage handle toward the locked position.

5. Install the:

a) front bezel

b) optical drive

c) cover

6. Follow the procedures in After Working Inside Your Computer.

Removing the Hard Drive

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove the:

a) cover

b) optical drive

c) drive cage

3. Perform the following steps as shown in the illustration: and

a) Press the retention clips inwards [1].

b) Slide the hard-drive bracket out from the drive cage. [2].

4. Flex the hard-drive bracket and remove the hard drive from the bracket.

Disassembly and reassembly