AVTevh 348Z 사용 설명서 - 페이지 5
{카테고리_이름} AVTevh 348Z에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AVTevh 348Z 6 페이지. Outdoor ir camera dvr / camera communication system series
페이지 인쇄4)
BACK LIGHT
It is the function to adjust the image to compensate for an area that is overpowered by
brightness because of excessive light. The image will be properly exposed for clearness.
Select to activate (ON) or disable (OFF) this function.
Note: This function is available only in the day mode.
5)
AGC
It is a function to adjust the amplitude of the signal input according to different light
conditions.
The options are: HIGH / MIDDLE / LOW.
Note: The higher the sensitivity is, the more the signal noise will be.
6)
MIRROR
Mirror is used when you want to rotate the images horizontally based on your installation
situation.
The options are: ON / OFF.
7)
COLOR MODE
Set the color mode as COLOR / BW / AUTO.
alarm shop
8)
IR CONTROL
Select "IR PRO" to smartly activate the IR LEDs when needed, "ALWAYS-ON" to always
activate the IR LEDs, or "ALWAYS-OFF" to deactivate the IR LEDs.
9)
RESET DEFAULT
Click "SUBMIT" to reset the system configurations to default values.
10) ZOOM
Click to adjust the zoom ratio of the camera. 5x zoom is available.
11) FOCUS
This function is used when users are not satisfied with the default focus setting in the
daytime or at night, and want to adjust the focus by themselves. Otherwise, "DEFAULT"
is selected.
To customize the focus setting, click "USER" to enter the focus setting page. The camera
will determine whether the current environment is in the day mode or night mode, and
enable the corresponding setting to be adjusted.
There are six setting values respectively for each mode, starting from the 6th value:
Click to select and adjust the lens focus.
/
Click to confirm the setting. The value changed will be shown in red.
Click to exit.
4