Cradlepoint AER1650 Series 사용자 설명서 - 페이지 16

{카테고리_이름} Cradlepoint AER1650 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cradlepoint AER1650 Series 20 페이지. Micro branch router
Cradlepoint AER1650 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄

User Manual

AER1600/AER1650

CONNECTION MANAGER

The router can establish an uplink via Ethernet, WiFi as WAN, or 3G/4G modems (removable or external USB). If the

primary WAN connection fails, the router will automatically attempt to bring up a new link on another device: this

feature is called failover. If Load Balance is enabled, multiple WAN devices may establish a link concurrently.

WAN INTERFACE PROFILES & PRIORITY

This is a list of the available interfaces used to access the Internet. You can enable, stop, or start devices from this

section. Drag the priority icon ( ) up or down to set the interface the router uses by default and the order that it

allows failover.

Availability Key

Enable

Standby

STANDBY

Standby is used to decrease failover time from one WAN interface to another. When Standby is enabled for a WAN

profile or interface, the relevant interfaces are kept in a connected-but-idle (minimal, non-routed traffic) state. When

the current WAN connection is disrupted, the traffic will failover to the next priority WAN. If that interface is on

Standby, the connection is already established and failover will take much less time.

Note that the current connected interface(s) is/are indicated by a green connection state. For interfaces on Standby,

the interface is indicated by a yellow connection state. If the interface is indicated in red, the interface is not currently

connected or in Standby.

Standby is used to enable faster failover times only. If you want to manage traffic to a specific WAN interface, you

will need to use WAN Affinity. If WAN Affinity is enabled for a particular profile or interface, do not enable Standby for

that profile or interface as the failover results may vary and be unexpected.

Load Balance

WAN Verify

On Demand

Failback

Data Usage

+1.855.813.3385

cradlepoint.com

4/19/16