Cradlepoint MBR95 빠른 시작 매뉴얼

{카테고리_이름} Cradlepoint MBR95에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cradlepoint MBR95 2 페이지. Usb modem
Cradlepoint MBR95에 대해서도 마찬가지입니다: 설정 매뉴얼 (11 페이지)

페이지 인쇄

Quick Start

Contents:

Cradlepoint

MBR95

Instructions:

1. Install the USB Modem into the USB port on the back of the router.

2. Connect the AC power supply to the power port on the Cradlepoint router.

Plug the other end into a standard 110V AC wall outlet or power strip. Make sure

the On/Off switch is in the On position (solid line).

4. For Wired Connections

Connect the ethernet cable to one of the 4 Yellow LAN ports on the

Cradlepoint router. Connect the other end of the ethernet cable to the ethernet

port on your computer. You can connect up to 4 computers using this method.

(Do not use the blue WAN port)

For Wireless (WiFi) Connections

Using your device's wireless network connection program, find and connect

to the network name (SSID) listed on the label on top of your router, usually

MBR95-XXX.

Enter in the password (located on the same label as the SSID).

Once connected you should be able to surf the internet

MBR95 | USER MANUAL Firmware ver. 3.6.3

CRADLEPOINT

2.1 Ports, Buttons, and Switches

4G4RENT.COM

Guide|Cradlepoint MBR95+USB Modem

USB Modem

702.220.8888

AC Power

Supply

CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

2.2 LEDs

Power: The MBR95 must be powered using an approved 12V DC power source.

Ethernet Cable

(there is no splash page).