Dell Wyse Latitude 3480 사용자 설명서 - 페이지 22
{카테고리_이름} Dell Wyse Latitude 3480에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Wyse Latitude 3480 23 페이지. Mobile
Dell Wyse Latitude 3480에 대해서도 마찬가지입니다: 소유자 매뉴얼 (50 페이지)
페이지 인쇄
Enhanced Pre-Boot System Assessment (ePSA)
diagnostics
The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the
BIOS and is launched by the BIOS internally. The ePSA diagnostics provides a set of options for particular devices or device groups,
enabling you to:
•
Run tests automatically or in an interactive mode
•
Repeat tests
•
Display or save test results
•
Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
•
View status messages that inform you if tests are completed successfully
•
View error messages that inform you of problems encountered during testing
CAUTION:
Use the system diagnostics that comes with your software to test only your computer. Using this program with other
computers may cause invalid results or error messages.
NOTE:
Some tests for specific devices require user interaction. Always ensure that you are present at the computer terminal
when the diagnostic tests are performed.
Running the ePSA diagnostics
1
Power-on the computer.
2
When the computer boots, press the F12 key.
3
On the boot menu screen, select the Diagnostics option.
The Enhanced Pre-boot System Assessment window is displayed.
4
Click the arrow key at the bottom left corner.
Diagnostics front page is displayed.
5
Press the arrow in the lower-right corner to go to the page listing.
The items detected are listed.
6
To run a diagnostic test on a specific device, press Esc and click Yes to stop the diagnostic test.
7
Select the device from the left pane and click Run Tests.
If there are any issues or error codes displayed, note the error code and validation number and contact Dell.
Testing memory using ePSA
1
Turn on or restart your system.
2
Perform the following action after the Dell logo is displayed:
•
On the keyboard — Press F12.
The PreBoot System Assessment (PSA) starts on your system.
NOTE:
If you wait too long and the operating system logo appears, continue to wait until you see the desktop. Turn off
the laptop and try again.
22
Troubleshooting
Troubleshooting
11