Dell Wyse Z90S7 설치 매뉴얼 - 페이지 13

{카테고리_이름} Dell Wyse Z90S7에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Wyse Z90S7 18 페이지. Z class cloud clients
Dell Wyse Z90S7에 대해서도 마찬가지입니다: 설치 매뉴얼 (24 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (6 페이지)

Installing WES7p Firmware

Figure 8 Configuration options

3. Select the Configure the USB key to Copy/Pull or to Update/Push firmware option,

and then click Next to open the Select the Configuration dialog box.

Figure 9 Update firmware options - Windows Embedded Standard 7 P

4. Select the Windows Embedded Standard 7 P operating system (OS) type option.

5. Select the Update or Push Firmware operation to perform option. Be sure that all

three contents options are selected (OS Image, BIOS, and CMOS).

6. Clear/uncheck the Preserve data partition check box.

CAUTION: Details for Thin Clients Currently Using Multiple Data Partitions:

Your existing custom data partition will not work with the WES7p firmware and you

must rebuild your custom data partition after you convert to WES7p. Although the

Preserve data partition check box is automatically selected to preserve any existing

custom data partition you may have on the thin client (useful for same firmware

platform upgrading use cases), be sure to clear/uncheck the check box to remove

the existing data in the custom data partition.

7. Click Next to open the browse dialog box.