Dell XC6320 시작하기 - 페이지 4

{카테고리_이름} Dell XC6320에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell XC6320 50 페이지. Web-scale hyperconverged appliance
Dell XC6320에 대해서도 마찬가지입니다: 웹 스케일 하이퍼 컨버지드 어플라이언스 솔루션 설명서 (23 페이지)

페이지 인쇄

Push the latch release buttons on the midpoints of the end piece to open the

rail latches (see Figure 1).

Align the end pieces of the rails on the vertical rack flanges to seat the pegs

in the bottom hole of the first U and the top hole of the second U.

NOTE: The rails can be used in both square-hole and round-hole

racks (see Figure 1).

Figure 1. Pushing the Latch Release Buttons

NOTE: To remove the rails, push the latch release button on the

midpoints of the end piece and unseat each rail.

Engage the end of the rails and release the latch release button to have the

latches locked in place.

On each vertical rack flange on the back, put two screw bases into the two

square holes right above the rail (see Figure 2).

Install the chassis stabilizer shipping brackets (optional) on the back rack

flanges.

Install and tighten the screws.

NOTE: To transport systems already installed in the rack, ensure

that the two chassis stabilizer shipping brackets (optional) are in

place.

Getting Started With Your System