Dell 6100 하드웨어 매뉴얼 - 페이지 8

{카테고리_이름} Dell 6100에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 6100 15 페이지. Dell poweredge 4200 servers: installation guide
Dell 6100에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 보충 설명서 (4 페이지), 랙 설치 (34 페이지)

페이지 인쇄

Dell PowerEdge 6100/200 System Microprocessor Replacement

4. On the new microprocessor module, check or set the jumper settings

according to those shown in Figure 5 and Table 1.

CAUTIONS: All microprocessors must have the same processor

speed or the jumpers on all the microprocessor modules must be

jumpered to the speed of the lowest-speed microprocessor.

All microprocessors must have the same cache size.

All 200 MHz/1 MB microprocessors must be used on a microprocessor

module with Dell part number 95545.

All 200 MHz/1 MB microprocessors must be used in conjunction

with Dell BIOS Revision A05 or greater and Dell customer diagnos-

tics software 3.79D00 or greater. The BIOS and diagnostics software

are available through the Dell bulletin board service (BBS) and the

Dell Web site at www.dell.com.

If a Dell customer diagnostics diskette is included with your system,

use the diskette instead of the Dell Server Assistant CD.

For microprocessor modules with one microprocessor, populate the

PROCESSOR 1 socket first.

Figure 5. 200 MHz/1MB Microprocessor Module