Dell Dimension 2200 교체 매뉴얼 - 페이지 7

{카테고리_이름} Dell Dimension 2200에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2200 9 페이지. Vga card installation instructions
Dell Dimension 2200에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 매뉴얼 (50 페이지)

페이지 인쇄

9. Connect the temperature sensor cable to the microprocessor module

and to the system board.

The cable for the primary microprocessor attaches to the TEMP_1 connec-

tor on the system board, while the cable for the secondary microprocessor

attaches to the TEMP_2 connector on the system board. The connectors on

the cable are keyed to ensure proper orientation.

10. Replace the computer cover.

11. Reconnect your computer and peripherals to their power sources, and

turn them on.

As the system boots, it detects the presence of the new microprocessor and

automatically changes the system configuration information in the System

Setup program.

12. Enter the System Setup program, and confirm that the Processor 1 and

Processor 2 categories correctly identify the installed microprocessor(s).

13. Run the system diagnostics to verify that the new microprocessor is

operating correctly.

See Chapter 2, "Using the Dell Server Assistant CD," in the Dell Power-

Edge 2200 Systems User's Guide for information on running the diagnostics

from the Dell Server Assistant CD. The Diagnostics and Troubleshooting

Guide provides additional information on running the Dell Diagnostics and

troubleshooting any problems that may occur.

Dell PowerEdge 2200 Systems Microprocessor Replacement