Dell Dimension 2200 매뉴얼 - 페이지 16

{카테고리_이름} Dell Dimension 2200에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2200 50 페이지. Vga card installation instructions
Dell Dimension 2200에 대해서도 마찬가지입니다: 교체 매뉴얼 (9 페이지), 설치 지침 (1 페이지)

페이지 인쇄
Dell Dimension 2200 매뉴얼
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.
10.  See the drive's documentation for instructions on installing any software required for drive operation.
Power Supply and Fan Assembly
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1.
 Shut down the
computer.
2.  Turn off any attached devices and disconnect them from their electrical outlets.
NOTICE:
To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3.  Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4.
 Remove the computer
cover.
5.
 Remove the front
panel.
6.
 Rotate the power supply
away from the system board.
7.  Disconnect the power cables from the connectors on the system board.
8.  Disconnect the power cables from all the drives.
9.  Press the power-supply retaining clips and lift the power supply and fan assembly out of the computer.
 
10.  Insert the replacement power supply and fan assembly into the power- supply retaining clips.
11.  Reconnect the power cables from the connectors on the system board.
12.  Reconnect the power cables from all the drives.
13.
 Rotate the power supply
back into place.
14.
 Replace the front
panel.
15.
 Replace the computer
cover.
16.  Plug your computer and devices into their electrical outlets, and turn them on.
NOTICE:
To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.

Control Panel

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
1.
 Shut down the
computer.
2.  Turn off any attached devices and disconnect them from their electrical outlets.
"Safety
Instructions."
"Safety
Instructions."