Allied Telesis AT-8824 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Allied Telesis AT-8824에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-8824 8 페이지. At-8800 series switch

RX and TX terminal locations on SC fibre GBIC ports are the reverse of RX and TX

terminal locations on fixed SC fibre ports. When looking at an SC fibre GBIC from the

front, the RX terminal is on the left and the TX terminal is on the right.

11. Connect the data cables

Make sure each cable connection is secure. The switch will now perform

basic Layer 2 switching functions.

Configuring the Switch

Some configuration is necessary if you wish to enable the switch's advanced

switching capabilities. The switch can be configured via the Command Line

Interface (CLI) or Graphical User Interface (GUI).

Using the CLI to configure a switch

Connect a terminal or PC to ASYN0 (RS-232)

Using the supplied RJ-45 to DB9F cable, connect your terminal or PC to the

ASYN0 port on the switch's front panel.

Set the communication parameters

Set the communication parameters on your terminal or terminal emulation

program to:

•

Baud rate: 9600

•

Data bits: 8

•

Parity: None

•

Stop bits: 1

•

Flow control: Hardware

Check the power supply

Ensure that the On/Off switch is in the On position and that the switch is

receiving power (PWR LED lights green).

After the switch has booted, the log in prompt appears. If the log in prompt

doesn't appear, press [Enter] two or three times.

When the switch boots for the first time it automatically creates an account

with manager privileges. The account has the log in name "manager" and

the password is "friend".

At the log in prompt, enter the log in name and password.

Password: friend

The switch's command prompt appears and you can now configure the

switch using the command line interface.

Change the password as soon as possible. Leaving the manager account with

the default password is a serious security risk. Make sure you remember the

new password as there is no way to retrieve it if it is lost.

AT-9800 Series Switch

C613-04043-01 REV D