Dell Dimension 2400 Series 설치 매뉴얼

{카테고리_이름} Dell Dimension 2400 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2400 Series 8 페이지. Vga card installation instructions
Dell Dimension 2400 Series에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 설치 매뉴얼 (20 페이지), 랙 설치 지침 (32 페이지), 설치 지침 (1 페이지), 매뉴얼 (43 페이지)

페이지 인쇄
Dell Dimension 2400 Series 설치 매뉴얼
(Rev. 3/29/00) FILE LOCATION: D:\test\10MRDam1.fm
!"# $
This document updates information contained in your Dell PowerEdge 2400 system
documentation.
When you install an 866-megahertz (MHz) processor on your Dell PowerEdge 2400
system, you must install an air baffle on the system's terminator card for single-
processor configurations.
To install the air baffle on the terminator card, perform the following steps:
1.
2.
DELL CONFIDENTIAL - PRELIMINARY
www.dell.com
Remove the terminator card from the guide bracket assembly, as described in
your Dell PowerEdge 2400 Systems Installation and Troubleshooting Guide.
Line up the holes on the terminator card with the posts on the air baffle, as
shown in Figure 1-1.
retaining tab
terminator card
4/14/00
P/N 10MRD Rev. A01
April 2000
air baffle
™