Dell DR4000 Restore Manager 소개 매뉴얼 - 페이지 5

{카테고리_이름} Dell DR4000 Restore Manager에 대한 소개 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell DR4000 Restore Manager 6 페이지. Dell dr series system system interoperability guide release 2.0.0.0
Dell DR4000 Restore Manager에 대해서도 마찬가지입니다: 릴리스 정보 (16 페이지), 설정 (1 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

Introduction to the Dell DR4000 Recovery Manager

3. Select Device mode in the top-left drop-down menu.

4. Click the USB icon in the left-hand pane.

5. Click the Options tab and ensure none of the options are selected.

6. Click the Restore button.

7. Browse to the location on your Windows system that contains the Restore Manager image

and select that image.

8. Click the Open button.

9. Click Yes to confirm you wish to copy the image to the USB key.

10. After the image copy is complete, exit the USB Image Tool.

11. Safely eject the USB key.

The Restore Manager USB key creation is complete.

3.1.2

Creating a Restore Manger USB Driver under Linux

Copy the downloaded Restore Manager image file to a Linux/Unix system.

2. Insert the USB key into an available USB port on the Linux/Unix system.

3. Make note of the device name that is reported by the operating system

(for example, /dev/sdc).

NOTE: Do

NOT

4. Copy the RM image to the USB key using the following command:

dd if=<path to .img file> of=<usb device> bs=4096k

For example:

dd if=/root/DR4000-UM-1.0.1.34557.img of=/dev/sdc

locally mount the USB device to a file system at this time.

bs=4096k