Dell DX6012S 사용자 설명서 - 페이지 41

{카테고리_이름} Dell DX6012S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell DX6012S 46 페이지. Rack installation instructions — static rails
Dell DX6012S에 대해서도 마찬가지입니다: 보충 설명서 (4 페이지), 하드웨어 설치 지침 (2 페이지), 설정 및 구성 매뉴얼 (43 페이지), 설치 및 구성 매뉴얼 (35 페이지), 시작하기 매뉴얼 (28 페이지), 공지 사항 (28 페이지), 공지 사항 (20 페이지), 개요 (19 페이지), 구성 매뉴얼 (9 페이지), 구성 매뉴얼 (9 페이지), 릴리스 노트 (8 페이지), 구성 매뉴얼 (7 페이지), 릴리스 노트 (6 페이지), 릴리스 노트 (5 페이지), 릴리스 정보 (5 페이지), 시작하기 매뉴얼 (47 페이지), 설치 (2 페이지), 랙 설치 (2 페이지)

Installing DX Cluster Services Node Software

If you have at least one data replica, any data on the failed storage node or

hard drive is replicated to another storage node in the cluster. Hardware status

for the DX Storage Nodes can be monitored from the DX Object Storage

Node Administration Console. Replace any failed hardware components on

the DX Storage Nodes as required to bring the failed node back into service.

The DX Cluster Services Node software distribution is available as a

collection of rpm packages that are installed with a self-extracting shell script.

The packages and their dependencies must be installed on the DX6a00

system as the root user. To install DX Cluster Services Node software:

1 Download the latest version of the DX Cluster Services Node software

distribution available online at support.dell.com/downloads.

2 Copy the distributed zip file to your DX Cluster Services Node system and

unzip it into the directory of your choice.

3 Install the DX Cluster Services Node software by running the

self-extracting script from inside the bundle directory location where the

shell script was unzipped.

This initiates installation of the DX Cluster Services Node software and its

dependent packages. For more information, see the Cluster Services Node

Installation and Configuration Guide at support.dell.com/manuals.

4 Eject the operating system media from the optical drive using the

following command:

# eject /media/dvd

5 Reboot the DX6a00 system when the installation completes.

Use the following command to reboot the system:

# reboot

Disaster Recovery