Dell E665 설치 및 서비스 매뉴얼 - 페이지 10
{카테고리_이름} Dell E665에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E665 23 페이지. Emc vxrail appliances on poweredge servers
Dell E665에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지)
페이지 인쇄
System health and system ID
indicator code
Blinking blue
Solid amber
Blinking amber
Right control panel view
Item
Indicator or button
1
Power button
2
USB 2.0-compliant port
3
iDRAC Direct LED
indicator
4
iDRAC Direct port (Micro-
AB USB)
For more information on the ports, see the Dell VxRail™ E665, E665F, and E665N Technical Specifications.
Drive indicator codes
The LEDs on the drive carrier indicates the state of each drive. Each drive carrier in your system has two LEDs: an activity LED
(green) and a status LED (bicolor, green/amber). The activity LED flashes whenever the drive is accessed.
10
System overview
Condition
Indicates that the system ID mode is active. Press the system health and system ID
button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists, see the
section.
Indicates that the system is experiencing a fault. If the problem persists, see the
Support
section.
Icon
Description
Indicates if the system is powered on or off. Press the power button to
manually power on or off the system.
NOTE:
compliant operating system.
The USB port is a 4-pin connector and 2.0-compliant. This port enables
you to connect USB devices to the system.
N/A
The iDRAC Direct LED indicator lights up to indicate that the iDRAC
Direct port is actively connected to a device.
The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC
direct Micro-AB USB features.
Press the power button to gracefully shut down an ACPI-
Support