Dell E665F 소유자 매뉴얼 - 페이지 15
{카테고리_이름} Dell E665F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E665F 37 페이지. Emc vxrail appliances on poweredge servers
Dell E665F에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (23 페이지)
페이지 인쇄
Right control panel view
Figure 7. Right control panel
Table 13. Right control panel
Item
Indicator or button
1
Power button
2
USB 2.0-compliant port
3
iDRAC Direct LED indicator N/A
4
iDRAC Direct port (Micro-
AB USB)
NOTE:
For more information on the ports, see the
Drive indicator codes
The LEDs on the drive carrier indicates the state of each drive. Each drive carrier in your system has two LEDs: an activity LED
(green) and a status LED (bicolor, green/amber). The activity LED flashes whenever the drive is accessed.
Figure 8.
1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive capacity label
NOTE:
If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn on.
Icon
Description
Indicates if the system is powered on or off. Press the power button to
manually power on or off the system.
NOTE:
compliant operating system.
The USB port is a 4-pin connector and 2.0-compliant. This port enables
you to connect USB devices to the system.
The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct
port is actively connected to a device.
The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC
direct Micro-AB USB features.
Ports and connectors specifications
Press the power button to gracefully shut down an ACPI-
VxRail E665 Series system overview
section.
15