DH Lifelabs CAHP-20XX01C 사용 설명서 - 페이지 4

{카테고리_이름} DH Lifelabs CAHP-20XX01C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Lifelabs CAHP-20XX01C 10 페이지.

Product Overview

1. Main Body

2. Plasma Generators (Internal)

3. Plasma Generators (Internal)

4. 3-in-1 HEPA Filter

5. Bottom Cover

6. Power Cord

3 5 3

The Sciaire Mini + HEPA incorporates a 5-stage cleaning system to help clean the air. A

fan forces air through the unit from bottom to top.

Stage 1: Plasma Generators in the air inlet. The plasma generators enlarge the diameter of

particles and generates an electrostatic magnetic field, thus improving the downstream HEPA filter's

absorption rates.

Stage 2: Pre-Filter. Captures large particulate matters including dust, pollen and hair.

Stage 3: H13 True HEPA Filter. The true High Efficiency Particulate Air (HEPA) filter captures up to

99.97% of particles down to 0.3 microns in diameter.

Stage 4: Activated Carbon Filter. The activated carbon filter traps odors, gases, and volatile organic

compounds (VOCs).

Stage 5: Plasma Generators in the air outlet. The plasma generatorss generate positive ions and

negative ions that are diffused into the air. These ions keep killing bacteria and viruses in the room.

As the room is filled with negative oxygen ions, you will enjoy a fresh smell - like the forest after a rain

shower. The ozone generated is well within US EPA safety limits and the optimum concentration (less

than 0.05ppm).

Remove the unit from the box and check that all the items are included. It is a good

idea to retain the packaging for storing the unit or in the event it must be shipped

back for service.

The unit is shipped with the 3-in-1 HEPA filter sealed inside a protective plastic bag.

Detach the bottom cover and remove the 3-in-1 HEPA filter from the plastic bag,

then replace it inside the unit and replace the bottom cover.

Locate the unit on a flat, solid surface in proximity to an AC electrical outlet.

Connect the AC adapter to the unit, and route the power cord to the outlet, but

do not plug it in yet. Make sure that the power cord is out of the way and does not

pose a tripping hazard, and is out of reach of children and pets. Connect the AC

adapter to the unit, and route the power cord to the outlet, but do not plug it in

yet. Make sure that the power cord is out of the way and does not pose a tripping

hazard, and is out of reach of children and pets.