Dell E75S001 참조 매뉴얼 - 페이지 9
{카테고리_이름} Dell E75S001에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E75S001 25 페이지.
페이지 인쇄Table 5. Processor Settings details (continued)
Option
Intel SST-BF
Intel SST-CP
x2APIC Mode
AVX ICCP Pre-Grant License
AVX ICC Pre-Grant Level
Dell Controlled Turbo
Dell Controlled Turbo Settings
Dell AVX Scaling Technology
Optimizer Mode
CPU Physical Address Limit
Number of Cores per Processor
Description
Enables Intel SST-BF. This option is displayed if Performance
Per Watt (operating system) or Custom (when OSPM is
enabled) system profiles are selected. This option is set to
Disabled by default.
Enables Intel SST-CP. This option is displayed if Performance
Per Watt (operating system) or Custom (when OSPM is
enabled) system profiles are selected. This option is displayed
and selectable for each system profile mode. This option is set
to Disabled by default.
Enables or disables x2APIC mode. This option is set to
Enabled by default.
NOTE:
For two processors 64 cores configuration,
x2APIC mode is not switchable if 256 threads are enabled
(BIOS settings: All CCD, cores, and logical processors
enabled).
Enables or disables AVX ICCP Pre-Grant License. This option
is set to Disabled by default.
Enables you to select between the different AVX ICC
transition levels offered by Intel. This option is set to 128
heavy by default.
Controls the turbo engagement. Enable this option only when
System Profile is set to Performance or Custom, and CPU
Power Management is set to Performance. This item can be
selected for each system profile mode. This option is set to
Disabled by default.
NOTE:
Depending on the number of installed processors,
there might be up to two processor listings.
Enables you to configure the Dell AVX scaling technology. This
option is set to 0 by default. Enter the value from 0 to 12
bins. The value that is entered decreases the Dell AVX Scaling
Technology frequency when the Dell-controlled Turbo feature
is enabled.
Enables or disables the CPU performance. When this option
is set to Auto, set the CPU Power Management to Max
Performance. When set to Enabled, enables the CPU Power
Management settings. When set to Disabled, the CPU Power
Management option is disabled. This option is set to Auto by
default.
Enables or disables the CPU Physical Address Limit option.
When set to Enabled,it disables Multiple Keys Memory
Encryption (MKTME) and sets the physical memory address
to 46 bits to support older Hyper-v . When set to Disabled,
the physical memory address is set to 52 bits to enable 5-
level paging, the system will crash at the driver verifier DMA
violation blue screen when booting with non-5-level paging-
supporting operating systems (Windows 2019 and, 2016 etc.)
This option is set to Enabled by default.
Controls the number of enabled cores in each processor. This
option is set to All by default.
NOTE:
This setting restores to default when user changes
System Profile or CPU Power Management setting of
Profile Settings.
Pre-operating system management applications
9