Dell EMC PowerEdge XE8545 기술 사양 - 페이지 23
{카테고리_이름} Dell EMC PowerEdge XE8545에 대한 기술 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerEdge XE8545 33 페이지.
페이지 인쇄
Table 31. Setup menu (continued)
Option
Description
generated by the system firmware and agents that monitor system components, go to
qrl.dell.com
Look Up > Error Code, type the error code, and then click
Look it up..
Set home
Select the default information to be displayed on the Home screen. See View menu section for the options
and option items that can be set as the default on the Home screen.
View menu
NOTE:
When you select an option in the View menu, you must confirm the option before proceeding to the next action.
Table 32. View menu
Option
iDRAC IP
MAC
Name
Number
Power
Temperature
NIC indicator codes
Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED
indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 9. NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Table 33. NIC indicator codes
NIC indicator codes
Link and activity indicators are off.
Link indicator is green, and activity indicator is blinking
green.
Link indicator is amber, and activity indicator is blinking
green.
>
Description
Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and
Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).
Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Displays the name of the Host, Model, or User String for the system.
Displays the Asset tag or the Service tag for the system.
Displays the power output of the system in BTU/hr or Watts. The display format can be
configured in the Set home submenu of the Setup menu.
Displays the temperature of the system in Celsius or Fahrenheit. The display format can
be configured in the Set home submenu of the Setup menu.
Condition
Indicates that the NIC is not connected to the network.
Indicates that the NIC is connected to a valid network at its maximum
port speed, and data is being sent or received.
Indicates that the NIC is connected to a valid network at less than its
maximum port speed, and data is being sent or received.
System diagnostics and indicator codes
23