Dell EMC PowerProtect DD6400 System 확장 매뉴얼 - 페이지 22

{카테고리_이름} Dell EMC PowerProtect DD6400 System에 대한 확장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell EMC PowerProtect DD6400 System 46 페이지.

2. Pull the sliding rail to the front of the cabinet and secure it to the front channel using two of the provided screws in the

middle two holes of the rail.

3. Secure the rail to the rear channel loosely with two screws to allow for adjustment when you install the enclosure.

Figure 18. Installing the rails

Installing the shelf on the rails

About this task

CAUTION:

The system components are heavy. To avoid personal injury and/or damage to the equipment, do not

attempt to install or remove system components without a mechanical lift and/or help from another person.

Steps

1. From the front of the cabinet or rack, lift the shelf and slide it onto the rails, as shown in the following figure.

Figure 19. Sliding the shelf onto the rails

2. When the shelf is completely seated into the rear tabs, secure the front of the shelf to the front vertical channels with four

screws (two per side), but do not tighten the screws until they are all in place.

Install the Disk Shelves in the Rack

Adjustable rail

Right front

Screw (2)

Mounting rail

Alignment pins

Right rear

Screw (2)

Alignment

pin (2)

Mounting rail

EMC3452

CL5845