Dell Force10 S2410 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Dell Force10 S2410에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Force10 S2410 31 페이지. Installing the s2410 system
Dell Force10 S2410에 대해서도 마찬가지입니다: 매뉴얼 (42 페이지)

페이지 인쇄

No portion of the back shell nor any latching mechanism on the diminutive side

of the trapezoidal CX4 connector nozzle shall extend more than 0.230 inches

from the connector centerline parallel to that side. No portion of the back shell

nor any latching mechanism on the opposite side of the trapezoidal connector

nozzle shall extend more than 0.375 inches from the connector centerline

parallel to that side. No portion of the back shell nor any latching mechanism

shall extend more than 0.0495 inches from the centerline of the connector

centerline perpendicular to the long axis of the trapezoidal nozzle.

Accessing XFP Ports

Dell Force10 offers various types of XFP transceivers. For details, see:

http://www.force10networks.com/products/specifications.asp

All ports in the S2410P use XFP transceivers except the dedicated Ethernet

Management port, and the S2410CP includes four XFP ports. The XFP

transceiver (not included in the S2410 chassis shipping box) is a small

rectangular module that you insert into the port and into which you insert an

optical cable. Each XFP contains two fiber optic leads. XFPs are hot-insertable

and swappable.

CAUTION: Electrostatic discharge (ESD) damage can occur if components

are mishandled. Always wear an ESD-preventive wrist or heel ground strap

when handling the S2410 and its components.

WARNING: Do not look directly into an optical port, which could result in

physical harm.

Installing the Hardware