Dell M3UX16 시작하기 매뉴얼 - 페이지 31
{카테고리_이름} Dell M3UX16에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell M3UX16 32 페이지. Servers for sap hana
페이지 인쇄
Perform reset operations
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Perform reset operations:
a. From the Maintenance tab, click Maintenance Operations > Unit Reset to open the Reset operations page.
b. Click the required Reset button.
Check monitoring sensors
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Check the monitoring sensors:
a. From the Monitoring tab, click Sensor Status to display the Sensor Status page.
b. From the Module tab, select a functional unit tab to display the included sensor values.
Next steps
See the guides in the documentation set for more information.
Check and clear the System Event Log
Steps
1. Connect to the SHC.
2. Start the SHC:
a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to
the settings. The Authentication page opens.
b. Complete the Username and Password fields and click Log On. The System Control page opens.
3. Check and clear the System Event Log (SEL):
a. From the Monitoring tab, click System Event Log to open the System Event Log page.
b. Use the Refresh button to update the display at any time.
c. Use the Clear button to empty the log. Entries are deleted and cannot be retrieved.
d. Use the Single Page button or the Multiple Pages button to change the display.
Basic Operations
Basic Operations
7
31