Dell OptiPlex FX130 매뉴얼 - 페이지 16
{카테고리_이름} Dell OptiPlex FX130에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell OptiPlex FX130 18 페이지. Re-imaging guide
Dell OptiPlex FX130에 대해서도 마찬가지입니다: 마운팅 매뉴얼 (8 페이지), 기술 매뉴얼북 (8 페이지)
페이지 인쇄Checking the System Information
The System Information of the terminal can be checked from the Re-
Imaging Utility at any time.
1
Follow the previous steps to open the boot menu and access the
Re-Imaging Utility. When the boot menu appears, select the named
hard disk or flash drive containing the Re-Imaging Utility and press
<Enter>.
2
Once the boot up is complete the Devon IT Re-Imaging Utility Dell
Edition Main Menu is displayed.
Use the arrow keys to select <9> Get System Information
3
and press <Enter>.
4
The Re-Imaging Utility will display a window full of information.
This information includes the names of both the vendor and the
model of the terminal the serial number of the terminal, what
version of the BIOS is in use, the sizes of the DOM and RAM,
and the MAC address.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide
|
16