Dell OptiPlex FX170 매뉴얼 - 페이지 14
{카테고리_이름} Dell OptiPlex FX170에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell OptiPlex FX170 18 페이지. Re-imaging guide
Dell OptiPlex FX170에 대해서도 마찬가지입니다: 마운팅 매뉴얼 (8 페이지), 기술 매뉴얼북 (10 페이지), 기술 매뉴얼북 (8 페이지)
페이지 인쇄
4
You will be asked if you wish to back up the current BIOS. Select
Yes if you wish to keep a back up.
5
A list of available BIOS images found on the hard disk or flash
drive will be displayed. Select the appropriate BIOS. Only BIOS
images that correspond to the terminal will appear.
6
Press <Enter> to begin the writing process. You will be asked if
you wish to preserve the Terminal's Vital Data. It is highly
recommended that you select Yes to preserve the UUID of the
terminal.
7
Once the writing process has finished, you will be taken back to
the Main Menu.
Specific Instructions for Backing up the BIOS
The BIOS that is currently on the terminal can have a back up created, in
case of an emergency.
1
Follow the previous steps to open the boot menu and access the
Re-Imaging Utility. When the boot menu appears, select the named
hard disk or flash drive containing the Re-Imaging Utility and press
<Enter>.
2
Once the boot up is complete the Devon IT Re-Imaging Utility Dell
Edition Main Menu is displayed.
3
Use the arrow keys to select <14> Backup BIOS Image and press
<Enter>.
4
The Re-Imaging Utility will ask you to name the BIOS. Type in
the name you wish to give the back up BIOS and press <Enter> to
continue with the back up process.
5
Once the back up has completed, the back up BIOS file will be
stored in the hard disk or flash drive, and you will be taken back
to the main menu of the Re-Imaging Utility.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide
|
14