Dell PowerApp 110 설치 매뉴얼 - 페이지 29
{카테고리_이름} Dell PowerApp 110에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerApp 110 34 페이지. Rack installation guide
페이지 인쇄
support.dell.com
Installing the Inner Rails on the Appliance Chassis
To install the inner rails to the sides of the appliance, perform the following steps.
CAUTION: The computer may weigh up to 10 kilograms (23 pounds) when
fully loaded. To prevent personal injury, do not attempt to move the
appliance by yourself.
1.
Place the computer on its side (see Figure 1-18) on a piece of foam or cardboard
(to prevent damage to the computer) while you install the inner rails to the sides
of the appliance.
Figure 1-18. Installing the Inner Rails
2.
Secure each inner rail to the side of the chassis with three 10-24 x 0.375-inch pan-
head Phillips screws (see Figure 1-18).
Installing the Appliance in the Rack
WARNING: If you are installing more than one computer, install the first
computer in the lowest available position in the rack.
WARNING: Never pull more than one component out of the rack at a time.
1.
Pull the two interior slide assemblies out of the rack until they lock in the
extended position.
CAUTION: Because of the size and weight of the computer, never attempt to
install the computer in the slide assemblies by yourself.
2.
Lift the computer into position in front of the extended slides.
Grasp the appliance with one hand on the right side of the computer and the
other hand on the left side of the computer.
inner rail (2)
10-24 x 0.375-inch pan-head
Phillips screws (6)
Rack Installation Guide
1-21