Dell PowerApp 120 정보 업데이트 - 페이지 3

{카테고리_이름} Dell PowerApp 120에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerApp 120 12 페이지. Systems information update
Dell PowerApp 120에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지), 설치 매뉴얼 (6 페이지)

Dell PowerApp 120 정보 업데이트
support.dell.com
Dell™ PowerEdge™ 1550 and
PowerApp™ 120 Systems
Information Update
This document updates information in your Dell PowerEdge 1550 and PowerApp 120
system documentation. It describes the following features:
Remote basic input/output system (BIOS) update
Dell Diagnostics dual in-line memory module (DIMM) isolation
Corrected orientation of heat-sink clip in figure
Remote BIOS Update
Dell OpenManage™ IT Assistant provides a feature, Remote Flash BIOS, that allows
you to upgrade the BIOS of a remote system without being at that system. The cur-
rent BIOS release does not support this feature. You can download an updated BIOS
at http:\\support.dell.com.
Dell Diagnostics DIMM Isolation
You can use the Dell Diagnostics software to identify a defective DIMM; however, if
you installed four DIMMs with the same density, the software cannot identify which
DIMM is defective.
To isolate the defective DIMM, perform the following steps:
1.
Remove two DIMMs in the same bank, BANK_1 or BANK_2.
2.
Run the Dell Diagnostics memory test.
For PowerEdge systems, run the memory test from a diagnostics diskette
created from the Dell OpenManage Server Assistant CD or from the utility
partition.
For PowerApp systems, run the memory test from the Dell PowerApp
Resource CD.
Systems Information Update
1-1