Dell PowerEdge 1750 서버 매뉴얼 - 페이지 9

{카테고리_이름} Dell PowerEdge 1750에 대한 서버 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1750 34 페이지. Systems
Dell PowerEdge 1750에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지), 데이터시트 (2 페이지), 빠른 시작 매뉴얼 (3 페이지)

페이지 인쇄
Dell PowerEdge 1750 서버 매뉴얼
 If the optional RAID on motherboard (ROMB) card is activated, two indicators on each of the hard-drive carriers provide information on the status of the SCSI
hard drives. See
Figure 1-3
and Table 1-3. The SCSI backplane firmware controls the drive power-on/fault indicator.
Figure 1-3. SCSI Hard-Drive Indicators
 
 Table 1-3
lists the drive indicator patterns. Different patterns are displayed as drive events occur in the system. For example, if a hard-drive fails, the "drive
failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for
insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online"
pattern.
 
NOTE:
If the optional ROMB card is not installed, only the "drive online" indicator pattern appears. The drive-activity indicator also blinks when the drive
is being accessed.
 
Table 1-3. Hard-Drive Indicator Patterns 
Condition
Identify drive
Drive being prepared for removal
Drive ready for insertion or removal Both drive indicators are off.
Drive being prepared for operation
Drive predicted failure
Drive failed
Drive rebuilding
Drive online

Back-Panel Features and Indicators

 Figure 1-4
shows the controls, indicators, and connectors located on the system's back panel.
 
NOTE:
Connect the power cable to connector PS1 if your system only has one power supply. See Figure 1-4.
Figure 1-4. Back-Panel Features and Indicators
 
Indicator Pattern
The green power-on/fault indicator blinks four times per second.
The green power-on/fault indicator blinks two times per second.
The green power-on/fault indicator is on.
The power-on/fault indicator slowly blinks green, amber, and off.
The amber power-on/fault indicator blinks four times per second.
The green power-on/fault indicator blinks slowly.
The green power-on/fault indicator is on.