Dell PowerEdge 1855 사용자 설명서 - 페이지 21

{카테고리_이름} Dell PowerEdge 1855에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 1855 33 페이지. Using dell blade servers in a dell poweredge high availability cluster
Dell PowerEdge 1855에 대해서도 마찬가지입니다: 정보 업데이트 (2 페이지), 빠른 시작 매뉴얼 (12 페이지), 매뉴얼 사용 (44 페이지)

페이지 인쇄

Back to Contents Page

Using the System Setup Program

Dell™ PowerEdge™ 1855 Systems User's Guide

Entering the System Setup Program

System Setup Options

System and Setup Password Features

Disabling a Forgotten Password

Acquiring the asset.com Utility

Baseboard Management Controller

After you set up your system, run the System Setup program to familiarize yourself with your system configuration and optional settings. Record the

information for future reference.

You can use the System Setup program to:

Change the system configuration stored in NVRAM after you add, change, or remove hardware

Set or change user-selectable options—for example, the time or date

Enable or disable integrated devices

Correct discrepancies between the installed hardware and configuration settings

NOTE:

When a server module is inserted into a chassis, the server module functions as a system. Each server module has a System Setup program to

allow configuration of the server module and features such as password protection.

Entering the System Setup Program

1. Turn on or restart your system.

2. Press <F2> immediately after you see the following message:

<F2> = Setup

If your operating system begins to load before you press <F2>, allow the system to finish booting, and then restart your system and try again.

NOTE:

To ensure an orderly system shutdown, see the documentation that accompanied your operating system.

Responding to Error Messages

You can enter the System Setup program by responding to certain error messages. If an error message appears while the system is booting, make a note of

the message. Before entering the System Setup program, see "System Beep Codes" and "System Messages" in your Installation and Troubleshooting Guide for

an explanation of the message and suggestions for correcting errors.

NOTE:

After installing a memory upgrade, it is normal for your system to send a message the first time you start your system.

Using the System Setup Program

Table 2-1

lists the keys that you use to view or change information on the System Setup program screens and to exit the program.

Table 2-1. System Setup Program Navigation Keys

Keys

Up arrow or <Shift><Tab>

Down arrow or <Tab>

Spacebar, <+>, <–>, left and right arrows Cycles through the settings in a field. In some fields, you can also type the appropriate value.

<Esc>

<F1>

NOTE:

For most of the options, any changes that you make are recorded but do not take effect until you restart the system.

System Setup Options

Action

Moves to the previous field.

Moves to the next field.

Exits the System Setup program and restarts the system if any changes were made.

Displays the System Setup program's help file.