Dell PowerEdge 2300 업그레이드 매뉴얼 - 페이지 11
{카테고리_이름} Dell PowerEdge 2300에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2300 24 페이지. Vga card installation instructions
Dell PowerEdge 2300에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 빠른 시작 및 연결 (5 페이지), 업그레이드 매뉴얼 (23 페이지), 랙 설치 지침 (26 페이지), 설치 지침 (1 페이지)
페이지 인쇄
support.dell.com
2.
If you are installing a 600 MHz or greater microprocessor, replace the system
board mounting plate as follows.
a.
Unlock and remove the front bezel.
b.
Remove the right- and left-side computer covers.
c.
Record the location and disconnect all external peripheral cables from their
connectors on the back of the computer.
d.
Record the location of any internal expansion card cables, and then record
the slot number assignments and remove all the expansion cards.
Place the expansion cards in antistatic bags or on a grounded antistatic mat
or other antistatic surface.
e.
Record the locations and disconnect all internal cables attached to the sys-
tem board.
f.
At the left side of the system, locate and remove the three screws that
secure the system board and mounting plate to the chassis (see Figure 1-1).
mounting
screws (3)
system board and
mounting-plate assembly
Dell PowerEdge Systems — Microprocessor Upgrade
1-7