Dell PowerEdge 2300 업그레이드 매뉴얼 - 페이지 7

{카테고리_이름} Dell PowerEdge 2300에 대한 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2300 24 페이지. Vga card installation instructions
Dell PowerEdge 2300에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 빠른 시작 및 연결 (5 페이지), 업그레이드 매뉴얼 (23 페이지), 랙 설치 지침 (26 페이지), 설치 지침 (1 페이지)

페이지 인쇄

support.dell.com

Before shutting down your system, perform these preliminary steps:

Record the system configuration

Update the ESM firmware

Update the BIOS (if necessary)

Use the RCU diskette (provided in the kit) to save the RCU configuration settings

(see your User's Guide for information).

View the system configuration screens in the System Setup program and make a

record of the settings.

If an ESM firmware diskette is included with your kit, update your ESM firmware with

the version contained on that diskette by performing the following steps. The latest

version of the ESM firmware is also available online at http://support.dell.com.

Insert the ESM firmware diskette provided in the upgrade kit into the diskette

drive.

Reboot the system.

After the system completes the boot routine, follow the instructions on the

screen.

After the Successfully Completed Done message appears on the screen,

remove the ESM firmware diskette from the diskette drive and follow the

instructions on the screen to reboot the system.

Dell PowerEdge Systems — Microprocessor Upgrade

1-3