Dell PowerEdge 2420 매뉴얼 - 페이지 5

{카테고리_이름} Dell PowerEdge 2420에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2420 11 페이지. Rack enclosures
Dell PowerEdge 2420에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지), 매뉴얼 (20 페이지), 매뉴얼 (17 페이지), 매뉴얼 (12 페이지), 매뉴얼 (10 페이지), 매뉴얼 (10 페이지), 매뉴얼 (9 페이지), 매뉴얼 (9 페이지), 매뉴얼 (10 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지), 기술 매뉴얼 (37 페이지)

페이지 인쇄

Cable Routing Procedures for Dell™ PowerEdge™ R515 Systems

1.2 Installing the Inner CMA Attachment Bracket

As described in the

Rack Installation Instructions,

attachment bracket based on which side you wish to mount the CMA. Use the bracket marked "A" for

mounting the CMA on the left side, and the bracket marked "B" for mounting on the right side. See

Figure 2.

Figure 2: Attaching the Inner CMA Attachment Bracket

1.3 Routing the Power Cables Through the Strain Reliefs

After you have installed the tray and cables, route the power cables through the strain reliefs located

on the power supply handles as shown in Figure 3.

Figure 3: Routing Power Cables Through the Strain Reliefs

1.4 Routing the Cables Through the CMA

The CMA can be installed on either the rear right or rear left side of the rails. Mounting the CMA on the

side that is opposite of the power supplies (left-side mount) is recommended; otherwise, the CMA

must be partially disconnected in order to remove the power supplies. Refer to Section 3 for details on

power supply replacement.

locate and attach the appropriate inner CMA

Page 3