Dell PowerEdge 2450 매뉴얼 - 페이지 3

{카테고리_이름} Dell PowerEdge 2450에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2450 15 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2450에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (20 페이지), 정보 업데이트 (12 페이지), 보충 설명서 (30 페이지), 하드웨어 설치 매뉴얼 (32 페이지), 소프트웨어 설명서 (10 페이지), 설치 매뉴얼 (8 페이지)

Section

Introduction

This paper provides step‐by‐step instructions for using Wake‐On‐LAN (WOL)

with Dell™ Servers.

Wake‐On‐LAN allows a server to be remotely powered on. Wake‐On‐LAN

technology resides in a server's managed network interface card (NIC) and/or in

a LAN‐on‐motherboard (LOM) integrated network connection.

When a WOL enabled system is placed in a power saving mode (hibernate,

standby, power off, etc...), the managed NIC or LOM uses the auxiliary power

source to monitor the network and receive a wake‐up packet. When a wake‐up

packet is received, the system powers up as normal.

The following tools are necessary to have on hand before using wake‐on‐LAN on

a Dell server:

1. DOS bootable floppy disk, MS DOS version 6.0 or newer, FreeDOS or

DRDOS (APM WOL only.)

2. IBAUTIL.EXE version 4.02.02.01 or newer for Intel network interface cards

(NICs) or Intel‐based LANs on Motherboard (LOMs).

3. B57UTIL.EXE version 10.11 or newer or B57UDIAG.EXE version 6.04 or

newer for Broadcom NICs or Broadcom‐based LOMs.

4. UXdiag.exe version 1.3.1 or newer for Broadcom NetXtreme II NICs or

LOMs.

5. Ethtool 1.8.4 or better for Linux WOL (Dell Servers support Red Hat

Enterprise Linux® and SUSE® Enterprise distributions of Linux.)

6. The latest BIOS for each system to use WOL.

October 2007

Page 3

Dell Enterprise Product Group