Dell PowerEdge 2550 랙 설치 지침 - 페이지 17
{카테고리_이름} Dell PowerEdge 2550에 대한 랙 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2550 40 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2550에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (32 페이지), 구성 매뉴얼 (10 페이지), 활성화 매뉴얼 (32 페이지), 설치 매뉴얼 (32 페이지), 매뉴얼 (28 페이지), 매뉴얼 (15 페이지)
F i g u r e 1 - 9 . S e c u r i n g t h e S y s t e m i n t h e R a c k ( F l u s h - M o u n t e d Tr a y
S h o w n o n U n i v e r s a l - H o l e S p a c i n g R a c k )
captive
fastener
Attach the front bezel, if one is available, to the system (see the system Installation
4
and Troubleshooting Guide for instructions).
You have completed the installation of the two-post support tray rack.
Two-Post RapidRails Kit
The two-post RapidRails rack kit is used to install a Dell system in a two-post, open-frame
relay rack, such as those found in telecommunications equipment facilities. Both 3-inch
and 6-inch wide two-post racks are accommodated. You can install this kit in a center-
mount or a flush-mount configuration. The kit incorporates slide assemblies, which enable
the system to be pulled out of the rack cabinet for servicing.
You must properly secure the two-post, open-frame relay rack to the floor, the ceiling or
upper wall, and where applicable, to adjacent racks, using floor and wall fasteners and
bracing specified or approved by the rack manufacturer or by industry standards. See the
two-post, open-frame relay rack manufacturer's installation documentation for
precautionary warnings before attempting this installation.
CAUTION: Do not attempt to install the system into a two-post, open-frame relay
rack that has not been securely anchored in place. Damage to the system and
personal injury may result.
Ra c k In s ta l lati on Gui de
1-11