Dell PowerEdge 2550 매뉴얼 - 페이지 3
{카테고리_이름} Dell PowerEdge 2550에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2550 28 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 2550에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (32 페이지), 구성 매뉴얼 (10 페이지), 랙 설치 지침 (40 페이지), 활성화 매뉴얼 (32 페이지), 설치 매뉴얼 (32 페이지), 매뉴얼 (15 페이지)
페이지 인쇄
About This Guide
This document updates information in your Dell™ system documentation.
To operate your system's SCSI hard-disk drives in a split 2 x 2 or 2 x 3 configuration, you
must install a second, optional daughter card. This daughter card connects to the SCSI
backplane board at the back of your system's hard-disk drive bays. Figure 1-1 shows the
location of the SCSI backplane board and other components associated with the SCSI
hard-disk drives.
F i g u r e 1 - 1 .
B a s i c S C S I H a r d - D i s k D r i v e S y s t e m C o m p o n e n t s
SCSI backplane board data cable
SCSI backplane
board interface cable
SCSI backplane board
SCSI hard-disk
drives (4)
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID 3
Installing the Daughter Card
CAUTION: To prevent bodily injury, before you install the daughter card, you
must turn off the computer and disconnect it from its AC power source. For more
information, see "Safety First—For You and Your Computer" in your System
Information document.
Turn off the system, including any attached peripherals, and disconnect the system
1
from the electrical outlet.
NOTICE: To prevent damage to the daughter card and system during this procedure, see
"Protecting Against Electrostatic Discharge" in your System Information document.
Unpack the SCSI backplane daughter card kit.
2
SCSI interface
connector SCSIA
SC SI B ackpl ane Daughter Card
1-1