Dell PowerEdge 2950 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dell PowerEdge 2950에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 2950 10 페이지. Cabling instructions for the -48 vdc power supply
Dell PowerEdge 2950에 대해서도 마찬가지입니다: 정보 업데이트 (50 페이지), 설치 정보 (11 페이지), 업데이트 (2 페이지), 사용 설명서 (15 페이지)

페이지 인쇄

Figure 1-2. Installing a SATA Optical Drive in a PowerEdge 1950 Drive Tray

optical drive

SATA power cable

optical drive carrier

Installing the SATA Optical Drive – PowerEdge 1950

1 Insert the optical drive tray into the system until it is fully inserted and

locked into position.

2 Connect the SATA cable (the end with the branching power cable) to the

back of the optical drive.

3 Connect the branching power cable to the power supply connector.

NOTE:

provided in the optical drive kit.

4 Route the SATA cable to the SATA_A connector on the system board.

Route the cable through the power cable cutout in the fan bracket and

follow the power cable routing to the power supply bays.

Bend the cable toward the chipset shroud and insert the cable into the

cable path on top of the chipset shroud. See Figure 1-3.

Connect the cable to the SATA_A connector on the system board.

Installing a SATA Optical Drive

You may need to replace the existing power cable with a cable

SATA cable

carrier latch