Dell PowerEdge 300 매뉴얼 확인

{카테고리_이름} Dell PowerEdge 300에 대한 매뉴얼 확인을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 300 27 페이지. Power supply update
Dell PowerEdge 300에 대해서도 마찬가지입니다: 업데이트 (2 페이지)

페이지 인쇄

support.dell.com

C H A P T E R 7

Checking Inside the Computer

Your Dell PowerEdge 300 system supports a variety of internal options that expand

system capabilities. This file prepares you to install options inside the computer. It

describes how to remove and replace the computer cover and rotate the power sup-

ply away from the system board. It also familiarizes you with the internal components

you may handle if you install Dell hardware options.

Before You Begin

To make working inside your computer easier, make sure you have adequate lighting

and a clean work space. If you temporarily disconnect cables or remove expansion

cards, note the position of the connectors and slots so that you can reassemble the

system correctly.

You will use the information in this section every time you install a hardware option

inside your computer. Read this section carefully , because the information is not

repeated in such detail elsewhere in this guide.

Safety First—For You and Your Computer

Working inside your computer is safe— if you observe the following precautions.

WARNING: FOR YOUR PERSONAL SAFETY AND PROTECTION OF YOUR

EQUIPMENT

Before starting to work on your computer, perform the following steps in the

sequence indicated:

Turn off your computer and all peripherals.

Disconnect your computer and peripherals from their AC power sources.

Also, disconnect any telephone or telecommunication lines from the com-

puter. Doing so reduces the potential for personal injury or shock.

If you are disconnecting a peripheral from the computer or are removing a

component from the system board, wait 10 to 20 seconds after disconnect-

ing the computer from AC power before disconnecting the peripheral or

removing the component to avoid possible damage to the system board.

Checking Inside the Computer

7-1